|
公司基本資料信息
注意:發布人未在本站注冊，建議優先選擇VIP會員 |
|||||||||||||||||||||||||||
| 標準工作臺工作直徑 Standard work rest(Dia.) |
Φ1～Φ35mm | 調整砂輪微調手輪 Regulating micro-feed-on hand wheel |
- |
| 特別工作臺工作物直徑 Special work rest |
Φ40～Φ60mm | 工作臺進刀手輪 Table feed-on hand wheel |
每轉7mm/revolution 每刻劃0.05mm/each graduation |
| 研磨砂輪尺寸（外徑×寬×內徑） Grinding wheel size(dia.×width×hole) |
Φ305×150×Φ120 | 工作臺微調手輪 Table micro-feed-on hand wheel |
每轉0.2mm/revolution 每刻劃0.001mm/each graduation |
| 調整砂輪尺寸（外徑×寬×內徑） Regulating wheel size(dia.×width×hole) |
Φ205×150×Φ90 | 修整進刀手輪 Dressing hand wheel |
每轉1.5mm/revolution 每刻劃0.01mm/each graduation |
| 研磨砂輪轉速 Grinding wheel speed |
1950 R.P.M | 調整輪傾斜角度 Regulating wheel tilt angle |
+5°～-3° |
| 調整砂輪轉速 Regulating wheel speed |
(16-330)R.P.M 24-365 R.P.M |
調整輪旋轉角度 Regulating wheel swivel angle |
±5° |
| 砂輪驅動馬達 Grinding wheel motor |
7 1/2HP×4P [10HP×4P] |
機械尺寸 Machine dimensions(L×W×H) |
1800×1400×1450mm |
| 調整砂輪驅動馬達 Regulating wheel motor |
1HP×6P[3HP] | Net weight | BLS-12 |
| 油壓驅動馬達 Hydraulic pump motor |
1HP | 機械重量 | 1700 kgs |
| 冷卻驅動馬達 Coolant pump motor |
1/8HP | 裝箱重量 | 1850 kgs |
| 調整砂輪進刀手輪 Regulating wheel feed-on hand wheel |
每轉3.5mm/revolution 每刻劃0.02mm/each graduation |
裝箱尺寸 package measurement(L×W×H) |
2350×1150×1770mm |
點擊圖片查看原圖
